There’s a lot of hype around CBD oil, but many people are finding that it doesn’t work for them. Why is this?
We are all here for the same reason, to find out if CBD will help us. The truth is that it’s hard to know what does and does not work because there are so many different strains, methods of use, etc. That being said, we have to be honest with ourselves and think critically about why CBD isn’t working for us. This post will explore the 8 most common reasons that CBD just isn’t working for you.
Reasons why CBD doesn’t work for you
#1: Poor quality CBD Product
Not all CBD products are created equal. A lot of people will say that it’s all about the quality of the product, and while this is an important point to consider, there are a few things you have to keep in mind when trying to find high-quality CBD oil. So, if you’ve purchased a poor-quality CBD product here are a few reasons why it might not be working.
Poor Potency CBD oil is typically sold at a concentration of 25, 40, or 50 mg/ml, but the average person should aim for a minimum dose of 15mg/day. The higher concentration means that it will take you longer to use up your bottle and the lower potency often means that you will end up taking more than necessary, resulting in a poor user experience. Not High Quality The first step to finding out if your CBD oil isn’t working is to have a look at the label and ensure that it has been lab-tested by an independent third-party company.
If there are no external testing results on the label then our advice would be to discontinue using this product as it may contain pesticides and other harmful chemicals. May Contain THC Make sure to check the label for THC content, especially if you’re trying CBD oil for the first time and have no tolerance to this substance. If the product contains any levels of THC then it will not work because cannabis compounds are thought to interfere with serotonin receptors in our brains which stop us from creating new serotonin when we need more.
#2: CBD doesn’t work because you’re Using Your CBD Product Incorrectly
This point is also closely tied into the quality of your CBD product and as we mentioned before, anything that’s not high-quality will likely be a waste of time and money.
If you’re using CBD oil as a tincture this means putting drops under your tongue and holding them there for 30+ seconds before swallowing. If you use the oil in your food or vape it then it won’t work.
The quality of the product will affect how long it takes to feel the full effects of CBD, but for most people, this means around 15-30 minutes after taking their dose. If you’re not feeling any difference at all within an hour or so (max 90 min) then you’re most likely using your CBD product incorrectly.
#3: It’s Not The Right Strain For You
One of the biggest selling points for CBD oil is that it contains a compound called cannabidiol (CBD), and while this might be true, there are over 80 other cannabinoids present in cannabis, and each one will elicit a different reaction from your endocannabinoid system.
If you’re not feeling any effects from the CBD oil then the most likely reason for this is that it’s not a suitable strain for you. If you’re unsure whether or not this is the problem, then we recommend getting a lab test done on your product to find out exactly what cannabinoids are present and at what concentrations.
Read more: How to Grow a High CBD Strain
#4: CBD Doesn’t Work Because You Don’t Need It
This may sound like an odd one but there are cases where CBD won’t work because either A) it does nothing once inside the body because our bodies don’t need it B) it just doesn’t play nice with our internal chemistry.
There are other substances in our brains called endogenous cannabinoids that are produced by our bodies naturally and they work in a similar way to CBD without any of the associated risks.
Arguably, this is why some people experience side effects from using CBD oil because it’s causing an increase in their brain levels of cannabinoids which aren’t needed or wanted.
#5: CBD Doesn’t Work Because You’re Using The Wrong Dose
As we mentioned in the previous section, making sure you’re using an external lab-tested product is a priority when it comes to ensuring that your dose will be potent and high-quality. If the concentrations of the cannabinoids are too low or too high, then they won’t work as intended and can cause side effects.
A very common problem with CBD doses is that people either take too much or not enough. The end result is no different from taking nothing at all! Here’s what you should do for a good CBD experience: Take a small test dose of around 10mg Wait between 60-90 minutes to feel any kind of effect If there’s been no change to the way you feel, take another 10mg test dose. Keep doing this until there’s some kind of change. If you’re still not feeling anything after taking a total of 30mg then your CBD oil might not be right for you (or it could be that you need THC).
#6: CBD Doesn’t Work Because Your Stomach Is Making You Feel Nauseous
For some people, they simply can’t take CBD because their stomachs are making them feel nauseous – even though it’s working for everyone else! This is where lab testing comes in again so that you know what specific cannabinoids are present and at what concentrations.
As we mentioned before, each strain contains different levels of cannabinoids so it’s important to make sure you’re using the right one for your needs. A good example of this is if you know that high-THC strains don’t work for you (or even make you feel worse) then stick with CBD-only or CBD-dominant products.
If CBD works well but only causes side effects in the form of feeling nauseous then it might be down to the terpene profile of your product. Different types of cannabinoids are affected by the presence of different terpenes which is why some products are made with specific terpene combinations for optimal effects.
Read more: Can You Have An Allergic Reaction to CBD Oil?
#7: CBD Doesn’t Work Because You’re Using The Wrong Delivery Method
Ideally, you should be using an oil-based CBD product which you place under your tongue. This method of delivery is the least effective form of all because it takes a while for the cannabinoids to get absorbed through the mouth’s mucous membrane into your bloodstream.
The quickest way to get CBD into your system is via vaping or smoking, then e-liquid or normal tobacco are the next best options.
If you’ve tried all of these delivery methods and still haven’t noticed any effects, then perhaps your CBD oil is no good.
Read more: Can You Vape CBD Oil?
#8: CBD Doesn’t Work Because You Need THC For It To Work
This one is a little bit controversial because some people say that their bodies don’t respond well to CBD unless it’s in the presence of THC.
The reason why this works for some people is that THC increases the permeability of our cannabinoid receptors (specifically CB1) to allow more CBD inside. On the other hand, there are also plenty of users who benefit greatly from using CBD oil without adding THC into the mix.
Conclusion
Some people claim that adding THC to their CBD oil makes it work better but the truth is, there’s no real evidence for this. It might simply be down to the idea that if something works then more of it will work even better so why not add another compound?!
There’s plenty of evidence that suggests that CBD can act as an antagonist to the effects of THC which means that it can reduce feelings of anxiety and paranoia. The truth is, not everyone wants to feel their heart pumping faster after taking CBD so if this is you then perhaps a THC-free product will be more beneficial.
If you’ve been struggling to find success with CBD, it may be time for a change. The 8 reasons why CBD doesn’t work could have contributed to your lack of progress in achieving desired results. In this article, we covered how each reason is affecting the way that you’re experiencing relief from symptoms and what steps can be taken going forward. If you want more information on any of these topics or would like help addressing them, please contact us today!